Samsung SNP-3302 User Manual page 59

Item
Hide the alarm
indicator
PTZ
Digital PTZ
Screen
Optimization,
Full Screen
Capture
Video Format

M
If the temperature drops below the operational range, video signal may not be produced. In such
cases, please wait for the video.

Web pages related to playback and setting menus are accessible only by the admin. For other
user accounts, the buttons will be deactivated.
To enable the Area Zoom mode
From the viewer screen, right-click to display the context
menu below:
Menu items and descriptions
• Go to 1x : Change the current zoom factor to x1.
• Prev : Return to the previous area and settings.
• Next : Change to the next area and settings.
Hides the alarm indicator near the border of the viewer screen.

In the following cases, the alarm message will pop up on the border of the
viewer.
- If an event (alarm, motion detection, video analysis) occurs
- If the camera is turned off
- If the network is disconnected
Control the pan/tilt/zoom operations of the camera.
Use the mouse wheel to control the digital zooming.
Adjust the screen to the optimal size, and display the Full Screen icon on the Live
screen.
Saves the snapshot as an image file in the .bmp format.
You can select a profile type in <Video profile> under the <Audio & Video> setup
menu.
M If the "Invalid codec" message is displayed, select a profile type from the profile
list again.
Description
English _59