Advertisement
Quick Links
TOP MOUNT
KITCHEN FAUCETS
Thank you for selecting American-Standard...
the benchmark of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--
please read these instructions carefully before you begin.
1
INSTALL FAUCET
Place FAUCET (1) in position on sink.
Note: Putty is not necessary unless mounting surface is uneven.
Assemble and hand tighten LOCKNUTS (2) from underside of SINK.
2
INSTALLATION OF OPTIONAL METAL LEVER HANDLES
(Supplied with Faucet)
Thread PORCELIAN LEVER HANDLE (2) counter-clockwise
and remove INDEX BUTTON with MOUNTING ROD ASSEMBLY (1),
HANDLE COLLAR (4) and O-RING (5).
Insert MOUNTING ROD ASSEMBLY (1) into METAL HANDLE (3),
HANDLE COLLAR (4) and O-RING (5).
Thread HANDLE ASSEMBLY (6) into ball of HANDLE BASE (7).
Apply pressure to the MOUNTING ROD ASSEMBLY (1)
while turning the HANDLE COLLAR (4), in order to tighten
firmly.
Instructions
T M
PUTTY
(IF REQUIRED)
SINK
Installation
4771
1
Certified to comply with ANSI A112.18.1M
U.S. Patent No. 5,819,789
M968950 Rev. 1.1
1
2
2
7
4
5
3
6
Advertisement
Related Manuals for American Standard Williamsburg 4771
Summary of Contents for American Standard Williamsburg 4771
- Page 1 Thread HANDLE ASSEMBLY (6) into ball of HANDLE BASE (7). Apply pressure to the MOUNTING ROD ASSEMBLY (1) while turning the HANDLE COLLAR (4), in order to tighten firmly. Installation Instructions PUTTY (IF REQUIRED) SINK 4771 Certified to comply with ANSI A112.18.1M U.S. Patent No. 5,819,789 M968950 Rev. 1.1...
- Page 2 WATER SUPPLY CONNECTIONS AND INSTALL SPRAY HOLDER Place SPRAY HOLDER (1) into separate hole of sink and assemble NUT (2) onto shank. From underside of sink hand tighten NUT (2). Do not use putty. Connect water supply to FAUCET with 1/2" IPS FLEXIBLE SUPPLIES (3) or 3/8"...