Table of Contents
Advertisement
Blade guard
Check that the guard is complete and without any cracks or
deformations.
WARNING! Always check that the guard is
!
correctly fitted before starting the machine.
Also check that the blade is fitted correctly
and is not damaged in anyway. A damaged
blade can cause personal injuries. See
instructions under the heading Assembly.
General safety precautions
IMPORTANT INFORMATION K950 Ring may only be used
for wet cutting. The water cleans and cools both the blade
and the component parts of the cutting equipment.
•
A power cutter is designed to cut hard materials, such as
masonry. Observe the increased risk of kickback when
cutting soft materials. See instructions under the heading
How to avoid kickback.
•
Do not use the power cutter until you have read the entire
contents of this Operator's Manual.
All servicing, in addition to the points listed in the section
"Control, maintenance and service of the power cutter's
safety equipment", should be carried out by trained
service specialists.
•
Never use the machine if you are tired, if you have
consumed alcohol, or if you are taking other drugs or
medication that can affect your vision, judgement or co-
ordination.
•
Wear personal protective equipment. See instructions
under the heading Personal protective equipment.
•
Never use a machine that has been modified in any way
from its original specification.
•
Never use a machine that is faulty. Carry out the checks,
maintenance and service instructions described in this
manual. Some maintenance and service measures must
be carried out by trained and qualified specialists. See
instructions under the heading Maintenance.
•
Never allow anyone else to use the machine without first
ensuring that they have understood the contents of the
operator's manual.
Transport and storage
Do not store or transport the power cutter with the blade fitted.
Store the power cutter in a lockable area so that it is out of
reach of children and unauthorised persons.
The blade should be removed from the machine after use and
stored well. Store the blade in the dry.
8 –
English
SAFETY INSTRUCTIONS
Fuel safety
(Refuelling/Fuel mixture/Storage.)
WARNING! Take care when handling fuel.
!
Bear in mind the risk of fire, explosion and
inhaling fumes.
•
Never refuel the machine while the engine is running.
•
Make sure there is plenty of ventilation when refuelling or
mixing fuel (petrol and 2-stroke oil).
•
Move the machine at least 3 m from the refuelling point
before starting it.
•
Never start the machine:
- If you have spilt fuel on it. Wipe off the spillage and allow
remaining fuel to evaporate.
- If you have spilt fuel on yourself or your clothes, change
your clothes. Wash any part of your body that has come in
contact with fuel. Use soap and water.
- If the machine is leaking fuel. Check regularly for leaks
from the fuel cap and fuel lines.
•
Store and transport the machine and fuel so that there is
no risk of any leakage or fumes coming into contact with
sparks or naked flames, for example, from electrical
machinery, electric motors, electrical relays/switches or
boilers.
•
Always store fuel in an approved container designed for
that purpose.
•
When storing the machine for long periods the fuel tank
must be emptied. Contact your local petrol station to find
out where to dispose of excess fuel.
•
Always use a Husqvarna fuel container with an anti-spill
valve.
WARNING! Bear in mind the risk of fire,
!
explosion and inhaling fumes. Stop the
engine before fuelling. Do not fill so that the
fuel runs over. Wipe up all spillage on the
ground and machine. If you spill fuel on
yourself or your clothes. Change your
clothes. Move the machine at least 3 metres
away from the refuelling area before starting.
Advertisement
Table of Contents
