Table of Contents
Advertisement
EC-declaration of conformity
(Applies to Europe only)
Husqvarna Construction Products, SE-433 81 Partille, Sweden, tel: +46-31-949000, declares under sole responsibility that the
power cutter K950 Ring from year 2006 serial numbers and onward (the year is clearly stated in plain text on the rating plate with
subsequent serial number) conforms with the requirements of the COUNCIL'S DIRECTIVE:
•
of June 22, 1998 "relating to machinery" 98/37/EC, annex IIA.
•
of May 3, 1989 "relating to electromagnetic compatibility" 89/336/EEC, and applicable supplements.
•
of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC. Conformity assessment according to Annex V.
For information relating to noise emissions, see the chapter Technical data.
The following standards have been applied: SS-EN ISO 12100:2003, EN-ISO 55012:2002, EN 1454, ISO 19432
SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has carried out voluntary type approval with
regard to directive 2000/14/EC. The certificate has the number: 01/169/011 – K950 Ring.
Partille November 14, 2006
Ove Donnerdal, Development Manager
´®z+R<|¶69¨
´®z+R<|¶69¨
26 –
English
TECHNICAL DATA
Advertisement
Table of Contents
