CHANGE KEYPAD
BEEP VOLUME
CHANGE VOICE
VOLUME
ACTIVATE
SIREN TEST
DISPLAY
FIRE ALARM
DISPLAY
FIRE TROUBLE
16
T O U C H P AD M E N U M O D E
continue to chime when system is armed.
CHANGE KEYPAD BEEP VOLUME - When the Touchpad buttons are pressed or
when an entry warning activates, the Touchpad beeper sounds. This function allows
Y/N
the Touchpad beeper volume to be adjusted. Press YES to increase, press NO to
decrease. Selections are HIGH, MED-HIGH, MED, LOW and OFF.
CHANGE VOICE VOLUME - All Touchpad functions are displayed in the LCD window
and are accompanied by a voice prompt. This function allows the Touchpad voice
Y/N
prompt volume to be adjusted. Press YES to increase, press NO to decrease. Se-
lections are HIGH, MED-HIGH, MED, LOW and OFF.
ACTIVATE SIREN TEST - Activates the alarm (while disarmed) for about 2 seconds
and performs a battery test. If the alarm does not sound, call for service. Note: If
Y/N
the battery is low, a "LOW BATTERY E02-00 SERVICE" will appear in the display
indicating a low battery condition. First allow 24 hours for the battery to recharge. If
the trouble continues, call for service.
DISPLAY FIRE ALARM - Displays alarms that have occurred on the Fire Zone(s).
Press the YES and NO buttons to scroll zones. Note: This selection only appears
Y/N
with a Master I-FOB inserted in the Touchpad.
DISPLAY FIRE TROUBLE - Displays trouble conditions that have been detected on the
Fire Zone(s). Press the YES and NO buttons to scroll zones. Note: This selection
Y/N
only appears with a Master I-FOB inserted in the Touchpad.