Adjusting The Projector Image; Adjusting The Projected Height; Adjusting The Zoom And Focus; Adjusting The Projected Image Size - ViewSonic VS11481 User Manual

Cine5000
Hide thumbs Also See for VS11481:
Table of Contents

Advertisement

INSTALLATION
2-2.ADJUSTING THE PROJECTED
IMAGE
2-2-1.ADJUSTING THE PROJECTED
HEIGHT
1.
Press the Elevator buttons. (Drawing 3)
2.
Raise the projector to the desired display
angle, allowing the legs to extend, release
the buttons to lock them in position.
3.
Use the Adjustable foot (Drawing 5) at the
rear of the unit to fine-tune the display angle.
4.
Use the "Keystone" button on the Remote
Control or in the projector's OSD to correct
any distortion caused by tilting the projector.
5.
There are two adjustable directions shown on
the screen, one is vertical keystone
correction, the other is horizontal keystone
correction, use the cursor buttons to select
the Vertical or Horizontal Keystone correction.
(Drawing 10 and Drawing 11)
Press "Right" cursor for increasing the value.
Press "Left" cursor for decreasing the value.
(Drawing 9)
Keystone
Ver. Keystone
Hor. Keystone
DRAWING 9
Ver. Keystone
DRAWING 10
Hor. Keystone
DRAWING 11
8

2-2-2.ADJUSTING THE ZOOM and FOCUS

Rotate the Zoom ring to adjust the image size. Rotate the Focus ring to focus the image. The projector will
focus at distances from 1.5m (60in. / 5 ft.) to 10m (394 in. / 32.9 ft.). The optimum distance is from 1.5 m to 5
m (197 in. / 16.5 ft.).

2-2-3.ADJUSTING THE PROJECTED IMAGE SIZE

DRAWING 13
0
0
38"
0
Distance To Screen (Meter/Inch)
Max. Screen Diagonal (Meter/Inch)
Min. Screen Diagonal (Meter/Inch)

2-3.OPERATION

2-3-1.CONNECTING TO A PERSONAL COMPUTER

Connecting to a Notebook
1.
Use the
VGA
cable to connect your Notebook to the projector. (Drawing 14)
2.
Press the "Monitor Output" function key of your Notebook.(Fn+
3.
The projector will automatically detect the source. If not, please press the "Source" button on the Control
Panel of the projector or on the Remote Control to select the computer source.
Focus Ring
Zoom Ring
DRAWING 12
179 "
128 "
77"
51"
109"
66"
44"
33"
1.5m
2.0m
3.0m
5.0m
1.5/60
2.0/79
3.0/118
0.98/38
1.30/51
1.94/77
0.83/33
1.11/44
1.67/66
Computer signal input
VGA cable
DRAWING 14
255"
204 "
219"
175"
153"
7.0m
8.0m
5.0/197
7.0/276
8.0/315
3.24/128
4.54/179
5.18/204
2.78/109
3.89/153
4.44/175
or
or
or
)
LCD
10.0m
10.0/394
6.48/255
5.55/219

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cine5000

Table of Contents