KTM 65 SX 2006 Owner's Manual page 16

PERIODIC MAINTENANCE SCHEDULE
VITAL CHECKS AND CARE PROCEDURES TO BE CONDUCTED BY THE OWNER OR THE MECHANIC
Check transmission oil level
Check coolant level
Check brake fluid level
Check brake pads for wear
Check brake performance
Lubricate and adjust actuating gas cable and nipples
Remove and clean dust sleeves of telescopic fork at regular intervals
Bleed fork legs regularly
Clean and lubricate chain, check tension and readjust it if necessary
Clean air filter and filter box
Check tire inflation pressure and wear
Check fuel line for leaks
Drain and clean float chamber
Verify smooth operation of all controls
Treat exposed metal components (except for the brake and exhaust systems)
with wax-based anti-corrosion agents
Treat all electric plug-in connections with contact spray
Check all screws, nuts, and hose clamps for their tight fit at regular intervals
RECOMMENDED INSPECTION OF THE 65 SX ENGINE BY YOUR KTM WORKSHOP
(ADDITIONAL ORDER FOR THE KTM'S WORKSHOP)
Check the reed-type intake valve for wear
Check the clutch discs for wear
Check the length of the clutch springs
Check the cylinder and piston for wear
Check the eccentricity of the crankshaft journal
Check the radial clearance of the conrod bearings
Check the radial clearance of the piston pin main bearing
Check the crankshaft main bearing for wear
Replace the crankshaft bearings and conrod bearings
Check the entire transmission including roller and bearings for wear
NOTE: IF THE INSPECTION ESTABLISHES THAT PERMISSIBLE TOLERANCES ARE EXCEEDED, THE RESPECTIVE COMPONENTS
MUST BE REPLACED.
»
before
each
start
after for cross once
every country a
cleaning use year
every every
20 hours 40 hours
15