Setting Up The Keyboard; Launching Logitech Application Software - Logitech TypeAway Setup

Setting Up the Keyboard

™
Connecting the Palm handheld to the keyboard
is a simple operation.
1. Grasp the keyboard in your hands (A)
and press the release button to open
the keyboard (B).
2. Lay the keyboard on a flat surface.
3. Lift up the stand, pulling the metal support
out so that the stand rests on the flat
surface (C).
™
4. Attach the Palm handheld by sliding
it onto the stand (D). The Palm
turn on when you press a key on the keyboard.
If you are attaching a Palm
m500 series handheld, please pay special
attention to how it connects to the keyboard
stand, as the connection varies depending on
™
the Palm handheld being used. The Palm
is shown here.
™
5. Rest the Palm handheld on the stand (E).
™
Note While the Palm
to the keyboard, you will not be able
to beam information.
6. With your finger tips, extend the thumb
rests by pushing them towards the flat
surface (F).
Launching the Logitech
™
1. On the Palm handheld, tap the Home icon to display the Applications Launcher.
®
2. Tap the Logitech icon to display the Setup screen.
3. Refer to the online User's Guide for more information about the Setup screen and how to use the Logitech
application software. (See "Getting More Information" in this booklet for details about viewing the keyboard User's Guide installed
on your computer.)
4
™
handheld will
™ m100 or Palm ™
™
Vx
handheld is connected
Application Software
®
English
A
C
E
B
PDA stand
D
Metal support
F
Thumb rest
®