Configuring The M8521 Tape Library For The Integrity Nonstop Ns-Series Server; Supported Connection; Supported Connection Adding The Control Path And Data Path - HP SL500 (M852x) User Manual

Tape library
Table of Contents

Advertisement

6
Configuring the M8521 Tape Library
for the Integrity NonStop NS-Series
Server
The section covers:

Supported Connection

Adding the Control Path and Data Path
Supported Connection
You can attach the M8521 tape library (control path and data path) to a Fibre Channel
ServerNet adapter (FCSA) on an Integrity NonStop NS-series server.
Note. The control path is used to control the robot, and the data path is used to control the
tape drive or drives.
Adding the Control Path and Data Path
Note. To obtain the portname numbers for your control path and data path, contact a service
representative from STK. The portname numbers used in this section are examples only.
To add the control path, issue this SCF command:
SCF> ADD SCSI $device, SENDTO STORAGE, PRIMARYLOCATION
(group, module, slot), PRIMARYSAC sac-id, LUN lun-id,
PRIMARYPORT 64-bit-portname
Example:
SCF> ADD SCSI $M8521, SENDTO STORAGE, PRIMARYLOCATION
(110,2,2), PRIMARYSAC 2, LUN 0, PRIMARYPORT 1234567891234567
SL500 (M852x) Tape Library Installation and User's Guide —541531-006
6-1
6-1
6 -1

Advertisement

Table of Contents
loading

This manual is also suitable for:

M852x

Table of Contents