IMPORTANT:
console is enabled and an active agile management console is configured.
If you configured a user network, enter a VIF IP address and netmask for the network.
If you configured a passive management console, enter the following command to verify the
status of the console:
ibrix_fm -i
IMPORTANT:
Configuring the management console on the dedicated (non-agile)
Management Server blade
This procedure is intended for systems that are not using the agile management console
configuration, and instead, the standard management console is configured on the Management
Server blade.
To configure the management console, complete the following steps:
Configure a passive agile management console only if the agile management
Next, go to
"Completing the restore on a file serving node" (page
Configuring the management console on the dedicated (non-agile) Management Server blade 139
129).