Table of Contents
Advertisement
Quick Reference
The following table lists the "Quick Commands" available with this control.
Key
Description
Quick Arm - If system is ready
#
1
Force Arm - bypasses faulted
2
#
zones
Quick Bypass -
Bypass
zone
Set Time
3
#
Zone Dir
4
#
Quick Help
50
#
Show Time
51
#
Show Auto
52
#
User log view
53
#
Set Auto Time of current part.
54
#
Display Firmware Version
55
#
Display Key Fob Low Batteries.
#
56
Door Strike
#
57
Change/View Pager number
#
58
Display/Toggle Chime Mode
6
#
Assign user to other partitions
7
#
User Page Toggle
8
#
User On-line
9
#
Multi-Part
0
#
- 4 -
Keypads
Comments
All keypads
Allows you to arm the system without requiring your user code. User
code is always needed to disarm the system, though.
All keypads
Allows you arm the system even if some zones are faulted. These
zones will be automatically bypassed and will be unprotected.
All keypads
If not enabled requires user code with authority 1,2 or 3
All keypads
May require user code
LCD only
Mode terminates after last enabled zone
LCD only
LCD only
May also require code
LCD only
May also require code
LCD only
Also, needs user code with authority level 1 or 2
All keypads
by partition, need user code
LCD only
All keypads
All keypads
May require certain user code
All keypads
For keypad partition, only LCD shows phone number
All keypads
LCD displays current state first, then offers to toggle. All others just
toggle the state.
All keypads
Need user Auth. Of 1 or 2, Digit 4 (P) enables user to page
Paging must be enabled and turned on.
All keypads
Toggles if users should send page for O/C by partition
All keypads
Connects to downloader while on line, disconnects home phone.
All keypads
LCD displays current enables, 1,2,3,P - P=
Advertisement
Table of Contents
