Indicators
QRG
Indicator
Name
TOC
Seat Belt
Reminder
Indicator
Low Fuel
Indicator
ABS (Anti-lock
Brake System)
Indicator
Index
Home
70
On/Blinking
•
Comes on and the beeper sounds
if you are not wearing a seat belt
when you turn the ignition switch
to ON
II
. If the passenger is not
wearing a seat belt, the indicator
comes on about six seconds later.
•
Blinks during driving if either you
or your passenger has not fastened
a seat belt. The beeper sounds
and the indicator blinks at regular
intervals.
•
Comes on when the fuel reserve is
running low (approximately 1.8 U.S.
gal./6.9 Liter left).
•
Blinks if there is a problem with the
fuel gauge.
•
Comes on for a few seconds when
you turn the ignition switch to ON
II
, then goes off.
•
If it comes at any other time, there
is a problem with the ABS.
Explanation
•
The beeper stops and the indicator
goes off when you and your
passenger fasten your seat belts.
Stays on after you or your
•
passenger has fastened the seat
belt - A detection error may have
occurred in the sensor. Have the
vehicle checked by a dealer.
Seat Belt Reminder Indicator
•
Comes on
- Refuel your vehicle as
soon as possible.
•
Blinks
- Have the vehicle checked by
a dealer.
•
Stays on constantly
vehicle checked by a dealer. With
this indicator on, your vehicle still has
normal braking ability but no anti-lock
function.
ABS (Anti-lock Brake System)
2011 CR-Z
Message
P.35
- Have the
P.221