Honda 2011 CR-Z Owner's Manual page 70

Indicator Name
•
Malfunction
•
Indicator Lamp
•
•
12 Volt Battery
Charging
•
System
Indicator
•
Transmission
Indicator
(Shift Position
•
*
Indicator)
*
Not available on all models
On/Blinking
Comes on when you turn the
ignition switch to ON II , and goes
off either when the engine starts or
after several seconds if the engine
is not started. If "readiness codes"
have not been set, it blinks five
times before it goes off.
Comes on if there is a problem
with the emissions control system.
Blinks when a misfire in the
engine's cylinders is detected.
Comes on when you turn the
ignition switch to ON II , and goes
off when the engine starts.
Comes on when the 12 volt battery
is not charging.
Comes on for a few seconds when
you turn the ignition switch to ON
II , then goes off.
Blinks if the transmission system
has a problem.
2011 CR-Z
Explanation
• Readiness codes are part of the on
board diagnostics for the emissions
control systems.
Readiness Codes
P.317
• Comes on during driving - Have
the vehicle checked by a dealer
immediately.
Blinks during driving
• - Stop in a safe
place where there are no flammable
objects. Stop the engine for 10
minutes or more, and wait for it to
cool down. Then, take the vehicle to a
dealer.
If the Malfunction Indicator Lamp
Comes On or Blinking
P.301
Comes on during driving
• - Turn off
the climate control system and rear
defogger in order to reduce electricity
consumption.
If the 12 Volt Battery Charging
System Indicator Comes On
• Blinks during driving - Avoid
sudden starts and acceleration and
have the vehicle checked by a dealer
immediately.
Indicators
Message
P.300
QRG
TOC
Index
Home
69