Changing The Rear Wiper Blade Rubber - Honda 2011 CR-Z Owner's Manual

Checking and Maintaining Wiper Blades
QRG

Changing the Rear Wiper Blade Rubber

TOC
Tabbed End
Index
Home
268
Changing the Rear Wiper Blade Rubber
1. Raise the wiper arm off.
2. Slide the wiper blade out from the wiper
arm while pushing the lock tab.
3. Slide the wiper blade out from its holder
by pulling the tabbed end out.
4. Remove the retainer from wiper blade and
mount it to a new rubber blade.
5. Slide the wiper blade onto the holder.
Make sure it is engaged correctly, then
install the wiper blade assembly onto
the wiper arm.
2011 CR-Z
Changing the Rear Wiper Blade Rubber
NOTICE
When replacing the wiper blade, make sure not to
drop the wiper blade or wiper arm down on the
rear window.