Simulate Simple Connect Button - Aztech 200Mbps HomePlug AV Ethernet Adaptor User Manual

5. Type the Device ID of the remote device. The Device ID can be found on the label
pasted on the device.
6. Click Apply. When the process is complete, the message Settings Applied appears.
After changing the Private Network Name of the remote HomePlug AV, it will no
longer be able to communicate with your local HomePlug AV, unless you use a
similar Private Network Name for your local HomePlug AV.

Simulate Simple Connect Button

Simulate Simple Connect Button allows you to apply functionalities without manually
pressing the Simple Connect button on a HomePlug AV device. However, this only works
on local devices.
Simple Connect Simple Connect Select to search and pair with another device, or search and join Simple Connect Simple Connect
an existing HomePlug AV network.
NMK Randomize Select to reset to a random Private Network Name. A HomePlug NMK Randomize NMK Randomize NMK Randomize
AV using a random Private Network Name will be disconnected from the
HomePlug network and will not be able to communicate with other devices until
it forms a new network or joins an existing network.
AVLN Status AVLN Status Displays the HomePlug AV Logical Network membership status
AVLN AVLN Status Status
number.
Note: Note: Note: The Simulate Simple Connect Button functions from HomePlug AV Utility can be used for HomePlug Note:
AV versions with or without the Simple Connect button on the device.
User Manual
Page 31 of 42