Simulate Simple Connect Button - Aztech 500Mbps 4-Port HomePlugAV Ethernet Adaptor User Manual

5. Type the Device ID of the remote device. The Device ID can be found on the label
pasted on the device.
6. Click Apply. When the process is complete, the message Settings Applied appears.
After changing the Private Network Name of the remote HomePlugAV, it will no
longer be able to communicate with your local HomePlugAV, unless you use a
similar Private Network Name for your local HomePlugAV.

Simulate Simple Connect Button

Simulate Simple Connect Button allows you to apply functionalities without manually
pressing the Simple Connect button on a HomePlugAV device. However, this only works
on local devices.
Simple Connect Simple Connect Select to search and pair with another device, or search and join Simple Connect Simple Connect
an existing HomePlugAV network.
NMK Randomize Select to reset to a random Private Network Name. A NMK Randomize NMK Randomize NMK Randomize
HomePlugAV using a random Private Network Name will be disconnected from
the HomePlug network and will not be able to communicate with other devices
until it forms a new network or joins an existing network.
AVLN Status AVLN Status Displays the HomePlugAV Logical Network membership status
AVLN AVLN Status Status
number.
Note: The Simulate Simple Connect Button functions from HomePlugAV Utility can be used for HomePlugAV Note:
Note: Note:
versions with or without the Simple Connect button on the device.
User Manual
Page 31 of 42