Setting The Hdmi; Audio Mode - Toshiba 26HL47 Owner's Manual

3
Press
~T~ ~
to highlight
No Label and press @.
4
Repeat steps 2 and 3 for other channels.
S
To save your settings, highlight
Done and press @.
If the desired channel label is not available from the list of
presets, you can create a custom label.
To create and assign a custom label:
1
Open the
Channel Labeling window.
2
Press
(£)
or
~
to select a channel you want to label.
3 Press ~ T ~ to highlight Custom and press @.
The software keyboard will appear.
Channel Labelmg
4
Repeatedly press the corresponding key on the remote
control to highlight the desired character on the on-screen
software keyboard.
S
The highlighted character is entered after you either press
a different key, press
~
key, or after a two-second pause.
6
Repeat steps 4 and 5 until you have entered all desired
text.
7
When finished, press
@.
8
(New labels will be added to the list in alphabetical order
and marked with an icon
I
to indicate that they are
custom.) Highlight the new custom label and press @ to
assign. Assigned channel labels will be displayed in the
banner,
Channel Add/Delete window, and Channels
Block window.
To delete the custom label:
1
Open the
Channel Labeling window.
2
Highlight the label to be deleted and press
CWo
I
32
3
Highlight
Yes from the deletion confirmation window
and press@.
Channel labeling
4
Highlight
Done and press @ to save changes, and go
back to the
Channel Labeling window.
Setting the HDMI™ audio mode
.....................
-.
_
.
To set the HDMI audio mode:
1 Press M~U and open the
Audio menu.
2
Highlight
Audio Setup and press @.
3 Press ~ or
T to select HDMI1 Audio and then press
~
or
~
to select the HDMI 1 audio mode
(Auto, Digital,
or
Analog). (Auto is the recommended mode.) See
"Connecting an HDMI or DVI device to the HDMI input"
(~page
17).
Note: Because the PC and HOMI-1 inputs share the same set
of analog audio inputs, the PC Audio menu setting influences
the HDM/1 Audio menu setting. If PC Audio is set to "No, " the
HDM/1 Audio setting changes to "Auto. " If PC Audio is set to
"Yes, " the HDM/1 Audio setting is set to "Digital" and is
grayed out in the menu. (Also see item 4 on page 11 and
"Setting the PC Audio" on page 52.)