Recalling A Preset Station; Clearing A Preset Station - Yamaha R-S300 Owner's Manual

FM/AM TUNING

Recalling a preset station

You can recall preset stations that were registered using
automatic station preset or manual station preset.
1
Press PRESET j / i on the front panel (or
PRESET j / i on the remote control) to select
a preset number.
y
• Preset numbers to which no stations are registered are skipped.
• "NO PRESETS" is displayed if no stations are registered.
22
En
PRESET j / i
PRESET j / i

Clearing a preset station

Follow the steps below to clear a preset station.
CLEAR
RETURN
1
Select the desired preset station number.
See "Recalling a preset station" on page 22.
2
Press CLEAR on the front panel.
The selected preset number flashes on the front panel
display.
y
To cancel clearing the preset station, press RETURN on the
remote control or leave this unit without any operations for about
30 seconds.
3
Press CLEAR on the front panel to confirm.
"PXX: CLEARED" (XX indicates the preset
number) is displayed on the front panel display, and
then the display returns to its original state.