Bluetooth® Handsfreelink; Remote Keyless Entry Setting - Acura 2008 MDX Navigation Manual

Main Menu
Getting Started
If you press the CANCEL button, the
message will be displayed the next time
you start the vehicle.
NOTE:
The system will display the current
message and any older or previously
unread messages, with the newest
message listed first.
18 Navigation System
®
Bluetooth HandsFreeLink
If you have a Bluetooth compatible cell
phone that is "paired," then CALL on
the Calculate route to screen is
enabled.
When you select CALL, the system
dials the number shown on the screen. If
CALL is not available (grayed out), and
your phone is "paired," then make sure
the phone has service or that HFL is not
in use; press the HFL BACK button.
For more information on Bluetooth®
HandsFreeLink®, see the vehicle
Owner's manual and the official web
site (www.acura.com/handsfreelink).
2008 MDX
®
Remote Keyless Entry
Setting
When you unlock the door and enter the
vehicle, the Multi-Information Display
(MID) in the gauge assembly welcomes
you with one of the following displays:
"Welcome Driver 1," "Welcome Driver
2," or just "Welcome." The vehicle
determines the driver number based on
which Remote Keyless Entry was last
used to unlock the vehicle.
NOTE:
• Remote transmitters 1 and 2 are
respectively identified on the back
with MEMORY 1 and MEMORY 2
labels.
• If only "Welcome" is displayed, then
all Setup settings revert to factory
defaults, and all personal data (such
as Address Book or Calendar) are not
available.