Acura 2008 MDX Navigation Manual page 135

Main Menu
Problem
When I drive at night, the screen is bright and will not switch
to the night display mode. Why?
The daytime map screen is dark like the night display mode,
and it is hard to see. Why?
During the day, I turned on the lights because it started to
rain, but the screen went dark. How can I make it still display
day mode?
How can I input my destination using map coordinates?
How do I change or remove my PIN?
I forget the PIN. How do I reset it?
I change my setup settings, but they are not saved when I
restart the vehicle.
I cannot access my Calendar or Address Book. Why?
CALL is not available on the Calculate route to screen.
Why?
The system thinks it is in Day display mode. Verify the following: The
display mode in Setup is set to Night mode, the dash brightness is not set to
maximum (must adjust with headlights on), and Map Color in Setup is set
to Black for Night. See Switching Display Mode on page 104.
Verify the following: The display mode in Setup is set to Day mode, and
Map Color in Setup is set to White for Day. See Switching Display Mode
on page 104.
Adjust the dash brightness (+) knob (with headlights on) to full brightness.
Remember to set it back to a medium setting, or at night, the screen will be
bright. See Switching Display Mode on page 104.
The navigation system was not designed for this. However, you can view
the coordinates of an address by pushing in on the Interface Dial, selecting
Show Icon on Map, and moving the Interface Dial left to select
Current Location. See Displaying Current Location on page 21.
Go to "Personal Information" in the Setup screen (second), and select PIN
Number. Enter your existing PIN, and then you have the choice to change
or remove the PIN. See page 88.
PINs are optional. See information regarding PINs on page 88. Your dealer
can reset the PIN for you.
Verify that your Remote Keyless Entry is linked (The MID shows
"Welcome drive 1" or "Welcome driver 2"). See page
information.
Your phone is not "paired" to the HFL, or if your phone is "paired," it is in
use; press HFL BACK button.
2008 MDX
Frequently Asked Questions
Solution
18 for additional
Navigation System 135