Connecting To A Microsoft Windows Nt 4.0 Server; Requirements; Procedure - HP Pro100B Installation Manual

Microsoft Windows 98
nd
2 edition

9 Connecting to a Microsoft Windows NT 4.0 Server

Requirements

Operating System
Driver Version
Driver File
Server OS
Client OS

Procedure

1 With the HP Vectra turned off, install the network adapter into a PCI slot.
2 Connect the network cable to the newly installed network adapter.
3 Power on the machine and boot to Windows 98.
4 Windows 98 will detect the network adapter as "Intel PRO/100B PCI
Adapter" during start up and install the OS embedded driver.
5 Click on "Yes" when Windows 98 prompts to restart the system.
6 After restarting the system, additional changes in the network properties,
such as: workgroup name, computer name, etc. may be necessary. Ask
your Network Administrator for more information. Restart the system if
changes are made.
Connecting to a Microsoft Windows NT 4.0 Server
nd
Windows 98 2 edition
3.37.07
E100bnt.sys
Windows NT 4.0 Server
Microsoft
Microsoft Windows 98 2nd edition
19