Settings For External Equipment - Toshiba DVR19DTKB Owner's Manual

Note
• If you have not set the clock, the clock setting window will
appear and follow to " Clock Setting" on page 67.
• You cannot set the End time for the satellite link timer
recording on this unit.
• [SAT.LINK] does not work under the following
circumstances:
- Setup menus are displayed.
- "Timer Programming" menu is displayed.
- Title list or any file list is displayed.
- During playback of DVD or VCR.
- During recording or dubbing of DVD or VCR.
• Recording picture will be distorted if the copy protection
signal is being detected during satellite link timer recording.
• When a regular timer recording and the satellite link timer
recording are overlapped, the examples are given below.
Example 1
Timer
Recording
Satellite Link
Actual
Recording
Example 2
Timer
Recording
Satellite Link
Actual
Recording
Example 3
Timer
Recording
Satellite Link
Actual
Recording

Settings for External Equipment

Video Colour System
When you record from external equipment or copy a
videotape to a DVD disc, you can set the format Auto, PAL or
SECAM.
1
In stop mode, press [SETUP]. Select "General
Setting" using [K \ L], then press [ENTER\OK].
2
Select "Recording" using [K \ L], then press
[ENTER\OK].
3
Select "Video Colour System" using [K \ L],
then press [ENTER\OK].
4
Select "Auto", "PAL" or "SECAM" using [K \ L],
then press [ENTER\OK].
38
EN
General Setting
Playback
Auto Chapter
Display
Recording Audio Select (XP)
Video
Auto Finalise
Recording Video Colour System
Aspect Ratio (Video mode)
Clock
Auto
Dubbing Mode
Channel
PAL
DivX
SECAM
Bilingual Recording Audio
HDMI
DVB Setting External Input Audio
Reset All Video Colour System
Auto: The video colour system will be set automatically
according to the recording material.
PAL: The video colour system will be set to PAL.
SECAM: The video colour system will be set to SECAM.
5
Press [SETUP] to exit.
Note
• During recording, when a signal other than PAL or SECAM
is detected, an error message appears on the screen and
recording will be paused. Recording will be resumed when a
PAL or SECAM signal is detected.
Recording from External Equipment
Video VR
DVD-RW DVD-RW DVD-RW DVD-RW DVD-RW DVD-RW
VCR VCR VCR
Before recording from external equipment, see page 19 for
connection instructions.
1
Turn on the TV and be sure to select the input to
which the unit is connected.
2
When you want to record to the disc:
Press [DVD].
Press [OPEN\CLOSE A] to open the disc tray,
then place the disc to record on.
Press [OPEN\CLOSE A] again to close the disc
tray.
When you want to record to a videotape:
Press [VCR].
Insert a videotape with a record tab into the
cassette compartment.
3
Select the input terminal to which the external
equipment is connected (AV1 or AV2).
Press [INPUT SELECT F] repeatedly to select the
external input mode, then press [PROG. G \ H]
repeatedly to select AV1 or AV2.
4
Select a recording mode using [REC MODE].
Refer to "Recording Mode" on page 28 for DVD or page
70 for VCR.
5
Press [I REC] (DVD / VCR) on the unit to start
recording.
6
Press the [PLAY B] button on the external
equipment.
7
For disc:
Press on the unit to stop recording.
[STOP C]
For videotape:
[EJECT\STOP A \ C]
Press
stop recording.
DVD-R DVD-R DVD-R DVD+RW DVD+RW DVD+RW DVD+R DVD+R DVD+R
on the unit to