Tone Signaling; Sp-Oca; Override Calls - Toshiba Strata DK User Manual

Tone Signaling

To make an OCA call
1. Lift the handset and
dial the [DN].

2. Press
busy tone and speak
to the called station

...or if you hear a
ring tone and speak
to the called station.

SP-OCA

To answer an SP-OCA call
Speak toward the
microphone of your
phone.
To disconnect an SP-OCA call to your station
63.5
Press

Override Calls

The available override features are:
Busy Override—enables you to send a muted ring tone to a busy station to
indicate that a call is waiting. The muted ring is programmed for each station as
two muted rings only or continued muted rings until the call is answered. This
option applies to the station receiving the muted ring. The muted ring can be sent
to the telephone speaker or to the telephone handset/headset and speaker.
Strata DK Electronic Telephone 5/99
You may hear busy or ring tone.
if you hear If you hear busy or ring tone after dialing the first digit
(2 or 1), disregard the tone and dial the second digit to
OCA the called telephone.
If you still hear a busy tone after dialing 21 or 12, the
called telephone is either busy on a speakerphone call
or does not have the OCA option set in system
programming. Either condition blocks OCA.
You may want to hold your hand over the handset
mouth piece to prevent the other party from hearing
you.
. The SP-OCA call made to your station disconnects.
The Grand Tour
Override Calls
53