Dvd Setup; 2 Dnx9980Hd - Kenwood DNX9980HD Instruction Manual

Setup Menu
Navigation Setup
You can set Navigation parameters.
1 Display the Navigation Setup screen
>
Touch [ ] [
2 Set each item
[NAV Interrupt Speaker] Selects speakers used
for voice guidance of the navigation system.
( "Front All")
"Front L": Uses the front left side speaker for
voice guidance.
"Front R": Uses the front right side speaker for
voice guidance.
"Front All": Uses both front speakers for voice
guidance.
[NAV Voice Volume] Adjusts the volume for
voice guidance of the navigation system.
( "25")
[NAV Mute] Mutes the volume of rear speakers
during voice guidance of the navigation system.
( "ON")
When turned "ON", the volume level drops for
voice guidance.
82
DNX9980HD
>
] [Navigation]. (page 72)

DVD Setup

You can set up the DVD play.
1 Display the DVD Setup screen
>
Touch [ ] [
2 Set each item
[Menu Language]*
1
language. See <DVD Language Setup> (page
[Subtitle Language]*
language. See <DVD Language Setup> (page
[Audio Language]*
1
See <DVD Language Setup> (page
[Dynamic Range Control]*
range. ( "Dialog")
The dynamic range is reduced by changing
from "Wide" to "Normal" and from "Normal" to
"Dialog". "Dialog" makes the total sound volume
becomes larger as compared with "Wide" and
"Normal", allowing you to listen to the movie's
dialog more clearly.
This is effective only when you are using a Dolby
Digital software.
The operation is available during the play stop
mode.
[Angle Mark] Sets an angle mark display.
( "ON")
[Screen Ratio]*
1 Selects the screen display
mode. ( "16:9")
"16:9": Displays wide pictures.
"4:3 LB": Displays wide pictures in the Letter Box
format (having black stripes at the top and
bottom of screen).
"4:3 PS": Displays wide pictures in the Pan &
Scan format (showing pictures cut at the right
and left ends).
>
] [DVD SETUP]. (page 72)
Selects a disc menu
1 Selects a subtitle
Selects an audio language.
83).
1 Sets the dynamic
83).
83).