Getting Started - Kenwood DNX9980HD Instruction Manual

Getting Started

Initial Setup
This setting is only necessary when you use
the unit for the first time after purchase,
and when you reset the unit.
1
Turns the power On.
2
Touch the corresponding key and set the
value.
Language Setting
ASR
Language Select
Enter
Cancel
When [ASR] is set to "Disabled"
GUI Language Select
Navigation Language Select Selects the language used for navigation.
Text Language Select
Monitor Angle Control
-1 – 5
Off Position
6 | Quick Start Guide
Selects whether to use the voice control function. (Preset: "Enabled")
Touching [Disabled] allows you to select languages for respective items.
"Enabled": Voice control is activated.
"Disabled": Voice control is deactivated.
Selects a language.
Determines the selected language.
Cancels the selected language.
Selects the display language used for the control screen and so forth.
Selects the language used for tag text (song information).
Sets the Monitor angle.
Stores the current monitor angle as the angle during power off.
Returns to the previous screen.
[Language] Select the language used for
the control screen and setting items.
[Angle] You can adjust the position of the
monitor.
[iPod AV Interface Use] You can
determine the use of iPod/AV-IN3 input
terminal. (Preset: "iPod")
"iPod": Select when connecting the
iPod using the KCA-iP302 for iPod.
"AV-IN3": Select to play an AV
component connected to the iPod/
AV-IN3 input terminal.
[Color] Sets the button illumination color.
[EXT SW] Set the controls for the external
devices.
[Camera] Set the parameters for the
Camera.
3
Touch [Finish].