Table of Contents
Advertisement
Installation
Verifying the Installation
To verify the HBA is properly installed and is operating:
1. Turn on the computer.
2. At power up, observe the POST LED indicators on the HBA. The position of
Table 3: Normal POST LED Indicators
Amber LED (L1)
Off
On
Slow blink (1 Hz)
Fast blink (4 Hz)
Flashing (irregular)
Off
On
Slow blink (1 Hz)
Fast blink (4 Hz)
Off
22
the POST LED indicators is defined in page 15 on page 15, and
page 22
of this guide. The green LED indicates power functions and the
amber LED signifies port activity. The amber LED blinks at all times during
normal operation.
Table 3
lists normal LED indications.
Green LED (L2)
Off
Wake-up failure (dead board)
Off
POST failure (dead board)
Off
Wake-up failure (dead board)
Off
Failure in POST (dead board)
Off
POST processing in progress
On
Failure while functioning
On
Failure while functioning
On
Normal—1 Gb link rate
On
Normal—2 Gb link rate
Blink (1 Hz)
Normal—link down or not yet
started
AB232A PCI-X Host Bus Adapter Installation Guide
Table 2
on
State
Advertisement
Table of Contents
