Table of Contents
Advertisement
/S
/D
/C
/P
The /L argument can be used with any of the configuration options. The /F argument can only be used
w
ith the
configuration option.
/C
Comm
an
d line a
Argument
/S
/D
/C
/P
/L
/F
Comman
d line examples
/S
cqniccmd /Sc:
c
qniccmd /S c
cqni
ccmd /S"c:\HP\teamcfg.xml"
/D
cqniccmd /D
/C
cqniccmd /Cc:\HP\teamcfg.xml
cqniccmd /C c:\HP\teamcfg.xml
cqniccmd /C"c:\HP\teamcfg.xml"
/P
cqniccmd /Pc:\HP\teamcfg.xml
cqniccmd /P c:\HP\teamcfg.xml
cqniccmd /P"c:\HP\teamcfg.xml"
/L
rguments
Description
This configuration option causes the source server configuration to be saved. The name of
the XML configuration data file must be specified and the path to the data file must exist.
This option is identical to saving the source server configuration by clicking Sav e in the
Network Teaming Configuration user interface.
This configuration option causes all teams on the target server to be dissolved, all VLAN
to be removed, and 802.1p/q Packet Tagging to be disabled for all adapters that had
no VLANs. No additional arguments are required or allowed with this option.
This configuration option applies the configur
system. An existing XML configuration data file must be specified following the target
switch. A space following the switch is optional. Any teams that exist on the targe
will be dissolved before the configuration is applied, all VLANs will be removed, and
802.1p/q Packet Tagging will be disabled.
This option is identical to the /C option, except that the configuration options are not
applied to the target system. This is useful fo
This option can be used to change the name and location of the cpqteam.log default log
file that is created in \cpqsystem\log on the system drive. The supplied path must exist.
An invalid log file name will cause the configuration to terminate with no changes. HP
recommends this option only in batch files.
This option causes
all errors, including those errors normally treated as non-fatal errors, to
be treated as fatal errors. This ar
\HP\teamcfg.xml
:\HP\teamcfg.xml
ation specified in the data file to the target
r syntax checking the XML data file.
gument can be used only with the /C option.
s
t server
Scripting 8
Advertisement
Table of Contents
