Winding The Bobbin - Euro-Pro 9025 Instruction Manual

Place empty bobbin on spindle. (3) Winder spindle / Devanadera
Take the thread from the spool through the guide to the
bobbin. (1/2)
Wind the thread a few times by hand around the empty
bobbin in a clockwise direction. Push the bobbin to the right
towards the bobbin winding position. (3) Press the foot
control gently. The bobbin will stop winding when it is full.
Push the bobbin to the left to "sewing position" and remove it.
Please Note: When the bobbin winder spindle is in "bobbin
winding" position, the machine will not sew-the hand wheel
will not turn. To start sewing, push the bobbin winder spindle
to the left (sewing position).
1
Poner la canilla vacia en el eje de la devanadera. (3)
Tirar el hilo de la bobina y hacerlo pasar por las guias. (1/2)
Envolver el hilo a mano en la canilla en el sentido contrario
de las agujas del reloj. Poner en marcha el motor pisando el
pedal.
Cuando la canilla esta llena el embobinado se para
automa ticamente. Cortar el hilo y sacar la canilla llena. (3)
2 3
10