Problem Solving - Eureka 965 series Owner's Manual

PROBLEM SOLVING

NOTE: Turn OFF the power switch and unplug the electrical cord before servicing.
PROBLEM
Motor won't start
No suction at end of
hose
Reduced suction
Cleaner shuts off
General questions
CAUSE
3
Electric plug
3
Power switch not
turned "ON"
3
Full paper bag
3
Hose
3
Front cover not
latched
3
Full paper bag
3
Slip ring open
3
Hose
3
Internal safety
thermostat trips
3
Assembly or related
attachments
SOLUTION
Push plug securely into
outlet.
Try another outlet.
Check circuit breaker.
Make sure power switch is
"ON."
Replace paper bag.
Remove any clogs from
hose that restrict airflow,
then try again.
Push front cover until it
latches firmly.
Replace paper bag.
Slide slip ring on wand until
hole is covered.
Remove any clogs from
hose that restrict airflow,
then try again.
Unplug cleaner and check
for obstructions in hose,
wands and attachments.
Check for full paper bag.
Clean/replace motor filter.
Call 1-800-282-2886
between 7:00 AM–8:00 PM
central standard time,
Monday through Saturday.
Know the Model number
and Serial number when
you call.
9