To Set Input Signal Selection - Eizo FlexScan T1781 User Manual

●

To set input signal selection

Setting
Auto
Manual
Procedure
1. Choose "Monitor Settings" from the Adjustment menu, and press
2. Choose "Input Signal" from "Monitor Settings", and press
3. Select "Auto" or "Manual" with
4. Press to exit.
Note
• If you select "Auto", the monitor enters the power saving mode after all the PCs have entered the power saving mode or
have been switched off.
44
Chapter7Reference
ThemonitorrecognizestheconnectorthroughwhichPCsignalsareinput.
WhenaPCisturnedofforentersthepowersavingmode,themonitorautomatically
displaysanothersignal.
ThemonitordetectsonlythePC'ssignalscurrentlydisplayingautomatically.Selectthe
inputsignalfordisplayusingthe
or .
Function
operationbutton.
.
.