To Remove Flickering Or Blurring; To Correct The Screen Position - Eizo FlexScan T1781 User Manual

●

To remove flickering or blurring

Procedure
1. Choose "Analog Adjustment" in the "Screen" menu, and press
2. Choose "Phase" in the "Analog Adjustment" menu, and press
The "Phase" menu appears.
3. Adjust the phase with
4. Press to exit.
When vertical bars appear on the screen after adjustment, go back to "To eliminate vertical bars ".
(Clock → Phase → Position)
Attention
• Flickering or blurring may not be eliminated depending on your PC or graphics board.
●

To correct the screen position

Note
• Since the number of pixels and the pixel positions are fixed on the LCD monitor, only one position is provided to display
images correctly. The position adjustment is made to shift an image to the correct position.
Procedure
1. Choose "Analog Adjustment" in the "Screen" menu, and press
2. Choose "Hor.Position" or "Ver.Position" from the "Analog Adjustment" menu, and press
The "Hor. Position" or "Ver. Position" menu appears.
3. Adjust the position with
4. Press to exit.
5. Close Pattern 1.
or to minimize flickering or blurring.
or .
.
.
.
Chapter2AdjustingScreens
.
23