Removal and replacement procedures
5. Remove the speaker assembly 4.
Reverse this procedure to install the speaker assembly.
Display assembly
Description
15.6-inch BrightView display assembly with webcam and 2 microphones for use in
white computers
15.6-inch BrightView display assembly with webcam and 2 microphones for use in
black computers
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the wireless antenna cables from the WLAN module (see
6. Remove the switch cover and keyboard (see
Remove the display assembly:
1. Disconnect the display panel cable 1 and the webcam/microphone cable 2 from the system board.
2. Remove the WLAN antenna cables from the clips 3 built into the top cover.
4–24
"Battery" on page
4-6).
"Switch cover and keyboard" on page
Spare part number
538348-001
538312-001
"WLAN module" on page
4-18).
Maintenance and Service Guide
4-16).