Removal and replacement procedures
Memory module (see
■
WLAN module (see
■
Modem module (see
■
Fan/heat sink assembly (see
■
Processor (see
■
Remove the system board:
1. Disconnect the modem module cable 1 from the modem module.
2. Disconnect the following cables from the system board:
2 Audio/infrared board cable
✎
The audio/infrared board cable connects to a LIF connector on the system board.
3 USB board cable
✎
The USB board cable connects to a LIF connector on the system board.
4 Power connector cable
✎
The power connector cable splits into two cables near the system board. One cable plugs into a connector on the
top of the system board. The other cable plugs into a connector on the bottom of the system board.
4–38
"Memory module" on page
"WLAN module" on page
"Modem module" on page
"Fan/heat sink assembly" on page
"Processor" on page
4-42)
4-10)
4-16)
4-33)
4-40)
Maintenance and Service Guide