Sunbeam Sleep Perfect Instruction Booklet page 15

Fitting your electric blanket (continued)
Connecting the controls
To connect the controls, lift one corner of the
blanket near the head of the bed to expose
the connector socket. With the control set
to the off position, pass the control cord
through the triangular hole in the fitted skirt
and insert the connector plug into the socket.
Ensure it is firmly clicked into position.
Repeat on the other side if required. Plug the
controls into a 230-240V power outlet and
turn the power on.
Note: Ensure that the controls are connected
to the blanket before inserting the power cord
into the power outlet. Connecting the power
before attaching the controls to the blanket
will replicate a power interruption and
activate the safety system, preventing your
blanket from heating.
Caution: The cord and controls must be kept
outside the bed and away from external
heating sources such as heaters and lamps.
Do not cover the control.
Figure 5.
13