W A R M I N G P R O D U C T User Manual Sleep warm. Sleep well.™ www.sunbeam.com...
Page 2
Twin Size warming blanket on a Twin Size bed. 14. If the following Important Instructions are not followed the warming prod- uct will not operate properly. 15. If you see the warming product operating improperly, unplug it immediately and call Sunbeam Consumer Care at 800-892-7684.
DO NOT RETURN THIS PRODUCT TO THE PLACE OF PURCHASE. If you have any questions while setting up or using your product, please visit us on the World Wide Web at: www.sunbeam.com or contact Sunbeam Consumer Care at: (800) 892-7684.
The preheat function will heat the bed for a period of 30 minutes and the control will return to its previous setting. 2 To reset the preheat feature, simply press the “On/Off” button OFF. 3 To turn back ON repeat step 1. For questions or support, please visit: www.sunbeam.com...
To reduce the risk of electrical shock, this plug is intended to fit only one way into an outlet. If the plug does not fit in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. For questions or support, please visit: www.sunbeam.com...
2 Adjust the warming setting to your personal comfort level. CAUTION: ALWAYS turn the warming blanket/mattress pad “OFF” when not in use. 3 To turn the warming blanket/mattress pad OFF simply press the “On/Off” button. For questions or support, please visit: www.sunbeam.com...
• SOLID STATE – for accurate and consistent heat control • EASY OPERATION – electronic control for easy operation • EASY GRIP – ergonomic control for easy operation • AUTO-OFF (SlimStyle AO only) – 3 hour Auto-Off (see page 2) For questions or support, please visit: www.sunbeam.com...
2 Drape the warming product over a clothesline or hang over a shower rod. DO NOT use clothespins. 3 Warming product must be completely dry before reconnecting the power plug or control plug. For questions or support, please visit: www.sunbeam.com...
Although several studies have been conducted to evaluate the impact, EMFs have not been proven to be harmful. In any event, Sunbeam has reduced the strength of EMFs in its blankets/mattress pads/throws to very low levels.
Page 10
Plug the power cord into the wall outlet. Set the control to “On.” If the system still does not operate after 2 or 3 times trying to reset, disconnect the power cord and contact Sunbeam Consumer Care.
FIVE year lim- ited warranty. Sunbeam, at its option, will repair or replace this product or any component of the product found to be defective during the warranty period. Replacement will be made with a new or remanufactured product or component.