Preparing The Notebook For Disassembly - HP Compaq nx9600 Maintenance And Service Manual

5.3 Preparing the Notebook for
Disassembly
Before you begin any removal or installation procedures:
1. Shut down the notebook. If you are unsure whether the
notebook is off or in hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the notebook.
3. Disconnect the power cord.
Battery pack, 12-cell, 2.2-AHr
4. Remove the battery pack by following these steps:
a. Turn the notebook upside down with the right side
Maintenance and Service Guide
Battery Pack Spare Part Number Information
toward you.
Removal and Replacement Procedures
380443-001
5–5