C H A P T E R 5 Configuring Features, Templates, Services, And Users; Telephony Features Available For The Phone - Cisco 7975G Software Manual

Telephony Features Available for the Phone

Telephony Features Available for the Phone
After you add Cisco Unified IP Phones to Cisco Unified Communications Manager, you can add
functionality to the phones.
configure by using Cisco Unified Communications Manager Administration. The Configuration
Reference column lists Cisco Unified Communications Manager documentation that contains
configuration procedures and related information.
For information about using most of these features on the phone, refer to Cisco Unified IP Phone 7975G
Guide. For a comprehensive listing of features on the phone, refer to Cisco Unified IP Phone Features
A–Z.
Cisco Unified Communications Manager Administration also provides several service parameters that
Note
you can use to configure various telephony functions. For more information about service parameters
and the functions that they control, refer to Cisco Unified Communications Manager Administration
Guide.
Table 5-1 Telephony Features for the Cisco Unified IP Phone
Feature
Abbreviated dialing
Anonymous Call Block
(SIP phones only)
Audible Message
Waiting Indicator
(AMWI)
Auto Answer
Auto Dial
Auto pickup
Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP and SIP)
5-2
Table 5-1
Description
Allows users to speed dial a phone number by entering an
assigned index code (1-99) on the phone keypad.
Users assign index codes from the User Options web
pages.
Allows a user to reject calls from anonymous callers.
A stutter tone from the handset, headset, or speakerphone
indicates that a user has one or more new voice messages
on a line.
The stutter tone is line-specific. You hear it only
Note
when using the line with the waiting messages.
Connects incoming calls automatically after a ring or two.
Auto Answer works with either the speakerphone or the
headset.
Allows the phone user to choose from matching numbers
in the Placed Calls log while dialing. To place the call, the
user can choose a number from the Auto Dial list or
continue to enter digits manually.
Allows a user to use one-touch, pickup functionality for
call pickup features.
Chapter 5 Configuring Features, Templates, Services, and Users
includes a list of supported telephony features, many of which you
Configuration Reference
For more information, refer to:
Cisco Unified Communications
•
Manager Administration Guide,
"Cisco Unified IP Phone
Configuration" chapter.
Cisco Unified Communications
•
Manager System Guide, "Cisco
Unified IP Phone" chapter.
Cisco Unified Communications
Manager Administration Guide, "SIP
Profile Configuration" chapter.
For more information, refer to Cisco
Unified Communications Manager
System Guide, "Cisco Unified IP
Phones" chapter.
For more information, refer to Cisco
Unified Communications Manager
Administration Guide, "Directory
Number Configuration" chapter.
For more information, refer to the
Cisco Unified Communications
Manager Features and Services
Guide, "Call Pickup" chapter.
OL-15790-01