Cisco 7975G Software Manual page 112

Telephony Features Available for the Phone
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature
Do Not Disturb (DND)
Extension Mobility
(SCCP phones only)
Fast Dial Service
Forced authorization
codes (FAC) (SCCP
phones only)
Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP and SIP)
5-8
Description
When DND is turned on, either no audible rings occur
during the ringing-in state of a call, or no audible or visual
notifications of any type occur.
You can configure the phone to have a softkey template
with a DND softkey or a phone-button template with DND
as one of the selected features.
The following DND-related parameters are configurable in
Cisco Unified Communications Manager Administration:
Do Not Disturb—This checkbox allows you to enable
•
DND on a per-phone basis. Choose Device > Phone >
Phone Configuration.
DND Option—Choose "Call Reject" (to turn off all
•
audible and visual notifications), or "Ringer Off" (to
turn off only the ringer). DND Option appears on both
the Common Phone Profile window and the Phone
Configuration window (Phone Configuration window
value takes precedence).
DND Incoming Call Alert—Choose the type of alert to
•
play, if any, on a phone for incoming calls when DND
is active. This parameter is located on both the
Common Phone Profile window and the Phone
Configuration window (Phone Configuration window
value takes precedence).
BLF Status Depicts DND—Enables DND status to
•
override busy/idle state.
Allows a user to temporarily apply a phone number and
user profile settings to a shared Cisco Unified IP Phone by
logging into the Extension Mobility service on that phone.
Extension Mobility can be useful if users work from a
variety of locations within your company or if they share a
workspace with coworkers.
Allows a user to enter a Fast Dial code to place a call. Fast
Dial codes can be assigned to phone numbers or Personal
Address Book entries. (See
Controls the types of calls that certain users can place.
Chapter 5
"Services" in this table.)
Configuring Features, Templates, Services, and Users
Configuration Reference
Cisco Unified Communications
Manager Features and Services Guide,
"Do Not Disturb" chapter.
For more information, refer to the
Cisco Unified Communications
Manager Features and Services
Guide, "Cisco Unified
Communications Manager Extension
Mobility" chapter.
For more information, refer to:
Cisco Unified Communications
•
Manager Administration Guide,
"Cisco Unified IP Phone Services
Configuration" chapter.
• Cisco Unified Communications
Manager System Guide, "Cisco
Unified IP Phone Services"
chapter.
For more information, refer to the
Cisco Unified Communications
Manager Features and Services
Guide, "Client Matter Codes and
Forced Authorization Codes" chapter.
OL-15790-01