C H A P T E R 5 Configuring Features, Templates, Services, And Users - Cisco 7940G Administration Manual

Chapter 5 Configuring Features, Templates, Services, and Users
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description
Caller ID Displays caller identification such as a phone number,
name, or other descriptive text on the phone screen.
Caller ID Blocking Allows users to block their phone numbers or e-mail
addresses from phones that have caller identification
enabled.
Conference
•
•
Private line The Cisco Unified Communications Manager
automated administrator can configure a phone number that the
ringdown (PLAR) Cisco Unified IP Phone dials as soon as the handset goes
off hook. This feature is useful for phones that are
designated for calling emergency or "hotline" numbers.
Redial Allows users to call the most recently dialed phone
number by pressing a button.
Cisco Unified IP Phone 7960G/7940G Administration Guide for Cisco Unified Communications Manager 7.0 (SIP)
OL-15499-01
Allows a user to talk simultaneously with multiple
parties by calling each participant individually.
Allows a non-initiator in a standard (ad hoc)
conference to add or remove participants; also
allows any conference participant to join together
two standard conferences on the same line.
Telephony Features Available for the Cisco Unified IP Phone
Configuration Reference
For more information, refer to:
Cisco Unified Communications
•
Manager Administration Guide,
"Configuring Cisco Unified IP Phones"
chapter.
• Cisco Unified Communications
Manager System Guide, "Understanding
Route Plans" chapter.
Cisco Unified Communications
•
Manager Features and Services Guide,
"Call Display Restrictions" chapter.
For more information, refer to Cisco Unified
Communications Manager Administration
Guide, "SIP Profile Configuration" chapter.
For more information, refer to
•
Cisco Unified Communications
Manager System Guide,
"Cisco Unified IP Phones" chapter.
• The Service parameter,
AdvanceAdhocConference, (disabled by
default in Cisco Unified
Communications Manager
Administration) allows you to enable
these features.
For complete information, see the
Cisco Unified Communications Manager
System Guide, "Conference Bridges"
chapter.
Be sure to inform your users whether
Note
these features are activated.
For more information, refer to Cisco
Unified Communications Manager System
Guide, "SIP Dial Rules" chapter.
Requires no configuration.
5-3