Taking A Measurement - Omron M6 AC Instruction Manual

3. Using the Device

3.3 Taking a Measurement

Notes:
• To cancel a measurement, press the START/STOP button to release the air in the arm cuff.
• Remain still while taking a measurement.
The monitor is designed to take measurements and store the measurement values in
the memory for 2 people using USER ID 1 and USER ID 2.
1.
Select your USER ID (1 or 2).
2.
Press the START/STOP button.
The arm cuff starts to inflate automatically.
START
12
INFLATE DEFLATE
Cuff Wrap Guide Lamp
COMPLETE
If your systolic pressure is
more than 210 mmHg
After the arm cuff starts to inflate, press and
hold the START/STOP button until the
monitor inflates 30 to 40 mmHg higher than
your expected systolic pressure.
Notes:
• The monitor will not inflate above 299 mmHg.
• Do not apply more pressure than necessary.