Olympus LS-12 Detailed Instructions page 93

Troubleshooting
Symptom
Noise is audible through the
recording monitor
Cannot record using overdubbing
Unable to set index marks, temp
marks
The PC is unable to recognize the
recorder
Probable cause
Acoustic feedback is occurring.
The chosen playback file is not a
[ PCM 44.1kHz/16bit ] format file.
[ Rec Format ] is not set to
[ PCM 44.1kHz/16bit ].
The maximum number of marks has been
reached.
The file is locked.
The file is read-only.
[ USB Connection ] is set to [ AC Adapter ].
Action
If the built-in speaker amps are used to
monitor recording, there is a risk that audio
feedback will occur while recording. It is
recommended that you use earphones to
monitor recording, or turn [ Rec Monitor ] to
[ Off ] before starting recording ( ☞ P.68).
Make adjustments, such as further
distancing the earphones from
the microphones, not pointing the
microphones at the earphones, or lowering
the volume of the recording monitor.
Choose a [ PCM 44.1kHz/16bit ] format file
for playback ( ☞ P.25, P.60).
Set [ Rec Format ] to
[ PCM 44.1kHz/16bit ] ( ☞ P.66).
Erase unnecessary marks ( ☞ P.45).
Unlock the file ( ☞ P.51).
Unlock the file or cancel the file's read-only
setting on the PC.
Set [ USB Connection ] to [ PC ] ( ☞ P.76).
8
EN
93