Inserting And Ejecting An Sd Card; Inserting An Sd Card - Olympus LS-12 Detailed Instructions

Inserting and ejecting an SD card

"SD" indicated in the instruction manual refers to
both SD and SDHC. This recorder enables you to store
data not only to the internal memory but also to a
1
commercially available SD card.

Inserting an SD card

1
While the recorder is in stop mode,
open the card cover.
2
With the SD card facing the correct
way, insert it into the card slot as
shown in the diagram.
EN
20
Terminal
surface
• Insert the SD card, keeping it straight.
• Inserting the SD card in the wrong way or at
an angle could damage the contact area or
cause the SD card to jam.
• If the SD card is not inserted all the way,
data may not be recorded on the SD card.
• When you insert the SD card, the recording
3 media changeover screen will appear.
Close the card cover securely.
4
To record on an SD card, press the +
or − button and select [ Yes ].
5
Press the OK button to complete
the setting.
Notes
• It is possible to switch the recording media over to
the internal memory ( ☞ P.72).
• In some cases SD cards that have been formatted
(initialized) by another device, such as a computer,
may not be recognized. Be sure to format SD cards
with this recorder before using them ( ☞ P.78).
• Battery life may be shorter when using an SD card
( ☞ P.98).