Seagate ST12400N Product Manual page 49

Product Manual - Hawk 2 Family SCSI-2 (Volume 1), Rev. B
________________________________________________________________________________________
continued from previous page
Com'd Supported by:
Code SCSI-1
1Bh Y
1Ch Y
Y
Y
1Dh Y
Y
Y
25h Y
28h Y
2Ah Y
2Bh Y
2Eh Y
2Fh Y
30h Y
31h Y
32h Y
33h N
34h N
35h N
36h N
37h Y
39h N
3Ah N
3Bh Y
3Ch Y
3Eh Y
3Fh Y
40h Y
41h N
42-4Bh N
4Ch Y
4Dh Y
4E-54 N
55h Y
56-59 N
5Ah Y
5B-5F N
60-BFh N
C0-DFh N
EO-FFh N
[1] If cache is enabled (RCD = 0 in Mode Sense Page 08h), Byte Transfer Length is 245,756 bytes (1,007,612
bytes for 1 MB buffer option) plus a 4 byte header.
If cache is disabled (RCD = 1), Byte Transfer length is 245,756 bytes (1,007,612 bytes for 1 MB buffer
option) plus a 4 byte header.
SCSI-2 Command Name
Y Start unit/stop unit (spindle ceases rotating)
Y Receive diagnostic results
Y Supported diagnostics pages
Y Translate page
Y Send diagnostics page
Y Supported diagnostics pages
Y Translate page
Y Read capacity
Y Read extended
Y Write extended
Y Seek extended
Y Write and verify
Y Verify
Y Search data high
Y Search data equal
Y Search data low
N Set limits
N Prefetch
N Synchronize cache
N Lock-unlock-cache
Y Read defect data
N Compare
N Copy and verify
Y Write buffer [1]
Y Read buffer [1]
Y Read long
Y Write long
Y Change definition
N Write same
N Not used
Y Log select
Y Log sense
N Not used
Y Mode select (10)
N Not used
Y Mode sense (10)
N Not used
N Not used
N Not used
N Not used
41