Maxtor D740X-6L 20.0 AT Product Manual page 17

Versatility
• Power saving modes
• Downloadable firmware
• Cable select feature
• Ability to daisy-chain two drives on the interface
   4 ' ) 7 . # 6 1 4 ; % 1 / 2 . + # 0 % ' 5 6 # 0 & # 4 & 5
Maxtor Corporation's disk drive products meet all domestic and international product
safety regulatory compliance requirements. Maxtor's disk drive products conform to
the following specifically marked Product Safety Standards:
• Underwriters Laboratories (UL) Standard 1950. This certificate is a
category certification pertaining to all 3.5-inch series drives models.
• Canadian Standards Association (CSA) Standard C.22.2 No. 1950. This
certificate is a category certification pertaining to all 3.5-inch series
drives models.
• TUV Rheinland Standard EN60 950. This certificate is a category
certification pertaining to all 3.5-inch series drives models.
2 T Q F W E V ' / +  ' / 5 3 W C N K H K E C V K Q P U
• CE Mark authorization is granted by TUV Rheinland in compliance
with our qualifying under EN 55022:1994 and EN 50082-1:1997.
• C-Tick Mark is an Australian authorization marked noted on Maxtor's
disk drive products. The mark proves conformity to the regulatory
compliance document AS/NZS 3548: 1995 and BS EN 55022: 1995.
• Maxtor's disk drives are designed as a separate subassembly that conforms to the
FCC Rules for Radiated and Conducted emissions, Part 15 Subpart J; Class B
when installed in a given computer system.
• Approval from Taiwan BSMI. Number: 3892A638
   * # 4 & 9 # 4 ' 4 ' 3 7 + 4 ' / ' 0 6 5
The Maxtor D740X-6L hard disk drives are compatible with the IBM PC AT, and
other computers that are compatible with the IBM PC AT. It connects to the PC
either by means of a third-party IDE-compatible adapter board, or by plugging a cable
from the drive directly into a PC motherboard that supplies an ATA interface.
Maxtor D740X-6L 20.0/40.0/60.0/80.0GB AT
General Description
2-3