Copy Density Adjustment; Automatic Copy Density Modes; Manual Copy Density Mode - Toshiba E-STUDIO230 Operator's Manual

6. COPY DENSITY ADJUSTMENT

There are 2 types of image density adjustments: automatic mode and manual mode.
In the automatic mode, the density of each original is detected automatically and the optimum image density
is selected. In the manual mode, you can select the desired level of image density. Adjust the density with
this mode depending on the original condition.

Automatic Copy Density Modes

1
Place paper in the drawer(s).
- "4.SETTING COPY PAPER"
2
Place the original(s).
- "1.SETTING ORIGINALS"
3
Press the [AUTO] button.
Select other copy modes as required.
4
Press the [START] button.

Manual Copy Density Mode

1
Place paper in the drawer(s).
- "4.SETTING COPY PAPER"
2
Place the original(s).
- "1.SETTING ORIGINALS"
3
Press either the
the copy density to the desired level.
- Each time you press either the
become lighter or darker respectively.
Select other copy modes as required.
4
Press the [START] button.
Page 36
Page 48
Page 36
Page 48
or button to adjust
or button, your copies will
3
103