Topcom Webt@lker 6000 Installation Manual page 36

PROBLEM
Handset is not
registering
No connection
between handset
and base station
Handset on the
charging cradle does
not charge
Handset does not
ring
Notes:
•
This Installation Guide covers the basic installation process
and the most common features of your Webtalker.
36
T R O U B L E S H O O T I N G
POSSIBLE CAUSE
• Base station is not ready for
registration.
• The charging cradle is not
connected.
• There are no batteries in the
handset.
• The base station is not connected.
• You are out of range of the base
station.
• The handset is not registered.
• The base station is not connected to
power.
• The cradle is not powered.
• The handset is not placed properly
in the charging cradle.
• The batteries are not inserted correctly.
• The Skype status is set to offline or
do not disturb.
• The handset ringer may be off.
• The handset may be too far away
from the base station.