Table of Contents
Advertisement
Indoor Unit Installation
SELECTION OF INSTALLATION LOCATION.
Such a place where cool air can be distributed
through out the room.
Such a place where is condensation water is easily drained
out.
Such a place that can handle the weight of indoor unit.
Such a place which has easy access for maintenance.
Such a place where is permitting easy connection with
the outdoor unit.
Such a place where is 1m or more away from other electric
appliances such as television, audio device, etc.
Avoid a location where there is heat source, high humidity
or inflammable gas.
Do not use the unit in the immediate surroundings of a
laundry, a bath, a shower or a swimming pool.
Be sure that the installation conforms to the installation
dimension diagram.
The space around the unit is adequate for ventilation (Refer
to Fig.23)
THERE ARE 2 STYLES OF INSTALLATION.
CEILING TYPE
FLOOR TYPE
Each type is similar to the other as follows;
Determine the mounting position on ceiling or wall
by using paper pattern to indicate indoor.
Mark the pattern and pull out the paper pattern.
Remove the return grill, the side panel and the
hanger bracket from the indoor unit as per procedure
bellow.
Press the fixing knob of the return grilles, the grilles
will be opened wider and then pull it out from
the indoor.
Remove the side panel fixing screw and pull to
the front direction (arrow direction) to remove.
(Refer to Fig.24)
Loosen two hanger bracket setting bolts (M8)
on each side for less than 10mm. Remove two
hanger bracket fixing bolts (M6) on the rear side.
Detach the hanger bracket by pulling it backward
(Refer to Fig.26)
CAUTION FOR INSTALLATION WHERE
AIR CONDITIONER TROUBLE IS LIKELY
TO OCCUR.
Where there is too much of oil.
Where it is acid base area.
Where there is irregular electrical supply.
Fig.22
60cm
or more
100cm
or more
Fig.23
Side panel fixing screw(M4)
INSTALLATION INSTRUCTIONS
INSTALLATION
PAPER PLANK
150cm
or more
60cm
or more
30cm
or more
Fig.24
Hide quick links:
Advertisement
Table of Contents
