Sleep Function Setting - C&H GTH18K3BI Owner's Manual

Swing function setting
SWING
SWING
TIMER

Sleep function setting

SWING
TIMER
Press Swing button then the swing mode will be operated by the air conditioner.
Repress Swing button once to stop swing mode.
Note: There is no swing mode for duct type indoor unit
When under the cooling or dehumidifying mode, after receiving the SLEEP order
for 1 hour, the previous set temp. Set will be risen for 1°C, and another
be risen after 2 hours that means that the temperature been risen
hours. Then the unit will run according to this set temp.
When under the heating mode, after receiving the SLEEP order for 1 hour, the
previous set temp. Set will be lower for 1°C, and another
hours that means that the temperature been lowered
unit will run according to this set temp.
There is no SLEEP mode under fan mode.
Note: The wired remote controller has no SLEEP mode button; if SLEEP mode is
needed to be set, complete the procedure by wireless remote controller.
1°C will
2°C within 2
1°C will be lower after 2
2°C within 2 hours. Then the