Hotkey And Shortcut Key Procedures; Hotkey And Shortcut Key Commands - HP COMPAQ 309971-002 Hardware Manual

Pointing Devices and Keyboard

Hotkey and Shortcut Key Procedures

To use a hotkey or shortcut key command on the notebook
keyboard, use either of the following procedures:
■
Briefly press the
of the hotkey command.
■
Press and hold down the
of the hotkey command, and then release both keys at the
same time.

Hotkey and Shortcut Key Commands

Displaying System Information (Fn+esc)
Press
Fn+esc
components and software version numbers. Press
time to remove the system information from the screen.
✎
The system BIOS date is the version number of the system ROM.
The BIOS date may display in a decimal format, for example,
10/19/2002 F.07.
Initiating Standby (Fn+F3)
The
Fn+F3
be initiated only while the notebook is on. If the notebook is in
Hibernation, you must restore from Hibernation before you can
initiate Standby.
To restore from Hibernation or resume from Standby, briefly
press the power button. For more information about using
Standby and Hibernation, refer to the "Power" chapter in the
Software Guide on the Documentation Library CD.
2–6
key, and then briefly press the second key
Fn
to display information about system hardware
hotkey is set by default to initiate Standby. Standby can
key, briefly press the second key
Fn
a second
Fn+esc
Hardware Guide