1. Manuals
  2. Brands
  3. Barco Manuals
  4. Projector
  5. R9001260
  6. Owner's manual

Barco R9001260 Owner's Manual

Projection system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
DATA
9200
R9001260
OWNER'S MANUAL

Advertisement

Table of Contents
loading

Related Manuals for Barco R9001260

Summary of Contents for Barco R9001260

  • Page 1 DATA 9200 R9001260 OWNER'S MANUAL...
  • Page 3 BARCO PROJECTION SYSTEMS DATA 9200 R9001260 OWNER'S MANUAL Date : Rev : Art. No. : 220198 R5975967...
  • Page 4 The use of shielded cables is required to comply within the limits of Part15 of FCC rules and EN55022. BARCO n.v./Projection Systems Noordlaan 5 B-8520 Kuurne Belgium Tel : +32/56/368211 Fax : +32/56/351651 E-mail : sales.bps@barco.com Visite Barco at the web : http://www.barco.com Printed in Belgium...

  • Page 5: Table Of Contents

    Standard Source Set Up Files UNPACKING AND DIMENSIONS ..................1-1 Unpacking ............................... 1-1 Projector dimensions ............................1-1 Battery installation in the RCU........................1-2 INSTALLATION GUIDELINES ..................2-1 Installation guidelines ............................2-1 * Environment ..............................2-1 * What about ambient light ? ........................... 2-1 * Which screen type? ............................
  • Page 6 Change Language ............................10-3 Reset Lamp Runtime ............................10-4 Lamp Run Time History ..........................10-4 Lamp Power Mode ............................10-4 BARCO logo ..............................10-5 Panel Adjustments ............................10-5 Preset Input Balance ............................10-5 I2C diagnosis..............................10-6 APPENDIX A : STANDARD SOURCE SET UP FILES ........... A-1 APPENDIX B : LENSES....................

  • Page 7: Unpacking And Dimensions

    Unpacking and Dimensions UNPACKING AND DIMENSIONS Unpacking Pull To open Warning : To prevent overheating of the projector as table mounted, always remove the wooden board and turn in the 3 supporting feet to allow air circulation via the built-in dust filter at the bottom. 3 7 9 Projector dimensions 1125.7...

  • Page 8: Battery Installation In The Rcu

    Unpacking and Dimensions Battery installation in the RCU. Note : projector address has to be programmed on the RCU before using the RCU (see chapter 'Controlling'). 310a.DRW...

  • Page 9: Installation Guidelines

    Installation Guidelines INSTALLATION GUIDELINES Installation guidelines * Environment * What about ambient light ? * Which screen type? T p…rr Ðvq ‡u For more information about screens, contact your local screen supplier. * What image size? How big should the image be?

  • Page 10: Where To Install The Projector

    Installation Guidelines * Where to install the projector? Inputs and computer video format input compatibility : Definitions of the Abbreviation on drawings Lens type selection. Ceiling SIDE VIEW Screen CD = B - A Optical axis projection lens Projector Projector Optical axis projection lens CD = B - A Screen...

  • Page 11: Location And Functions Of Control

    Location and Functions of Control LOCATION AND FUNCTIONS OF CONTROL Front Panel Terminology ÃÃ!"ÃW T h i s d e v i c e c o m p li e s w it h P art 1 5 o f t h e F C C ru l e s . O p e ra t i o n i s s u b je c t to f o ll o w i n g t w o c on d i t i o n s : ÃÃ(ÃÃÃÃÃ#Ã6 (1 ) T h i s d ev ic e m a y n ot c a u s e h a rm f u l i n t e rf e r en c e...

  • Page 12: Remote Control

    TEXT PAUSE %5,*+71(66 TINT SHARPN BRIGHTN &2175$67 &2175$67 PHASE COLOR 3 2 a Terminology FREEZ BARCO Key ENTER ADJ. EXIT Control disc Key '+' and '-' keys STBY PAUSE Help : Digit buttons Picture controls '+' and '-' keys PHASE...

  • Page 13: Installation Set Up

    Installation Set Up INSTALLATION SET UP 5 HDU& HLOLQJ ) URQW& HLOLQJ 5 HDU7 DE OH )URQW7DEOH ADJUST ENTER ENTER ADJUSTMENT MODE ENTER INSTALLATION EXIT or ADJUST ENTER INSTALLATION ENTER CONFIGURATION EXIT ADJUST CONFIGURATION ENTER FRONT/TABLE ENTER EXIT ADJUST...
  • Page 14 Installation Set Up...

  • Page 15: Connections

    Connections CONNECTIONS Power (mains) cord connection T h i s d e vic e co m p lie s w it h P a r t 1 5 o f th e F C C r u le s . O p e ra t io n is s u b je c t to fo ll o w in g t w o c o n d itio n s : ( 1 ) T h is d e vi ce m a y n o t c a u se h a r m f u l in te r fe r e n c e Fuses...

  • Page 16: Lamp Run Time

    Connections Lamp Run Time Lamp run time Lamp run time is 1000 hours. Operating the lamp longer than 1000 hours may damage 980 hours the projector. Please replace the lamp. WARNING Lamp run time is 1000 hours Operating the lamp longer than 1000 hours may damage the projector.

  • Page 17: Video/S-Video Input Module

    Connections Video/S-video input module VID EO S-VID EO AU D IO W D9 @ P T W D9 @ P ÃDI Q V U PR OJEC TO R MO DE : GREEN - O PERATIO N DIAGNOSTICS CODE IR-RECEIVER IR-ACKNOWLEDGED C O MM UN IC ATIO N POR T RED - STAND BY R S 232 IN...

  • Page 18: Rgb Analog Input Module

    Connections RGB Analog Input Module. PRO JECTO R M O DE : G REE N - O PER ATIO N DIAGNOSTICS CODE IR-RECEIVER IR-ACKNOWLEDGED CO M M UN IC ATIO N PO R T RED - ST AN DBY RS232 OUT R S 232 IN R EMO TE (800-PE R IPH ERA LS)

  • Page 19: Component Input Module

    Connections System Settings ENTER ADJUSTMENT MODE Select a path from below : RANDOM ACCESS INSTALLATION SERVICE ENTER Select with then <ENTER> INSTALLATION <EXIT> to return. INPUT SLOTS CONVERGENCE CONFIGURATION OSD COLOR ENTER INPUT SLOTS Select with then <ENTER> Slot Module type [Config] <EXIT>...

  • Page 20: Rgb3S/Rg3Sb Input Module

    Connections Straps on module level : Ay‚h‡vtÂ…Á ‚Ãsy‚h‡v tÃvƒˆ ‡ Non-Floating Floating T’pÆryrp‡v‚ T ’  p   Ã` T r ƒ h …h ‡r Æ ’  p U …vyr‰ryÃT’p I ‚ … € h yÃT ’  p RGB3S/RG3sB Input Module.

  • Page 21: Connecting A Computer, E.g. Ibm Pc (Or Compatible), Apple Macintosh To The Rs 232 Input Of The Projector

    Connections Straps on module level : E ' ÃT ’  p Æ r yr p ‡v‚  T rƒ h …h ‡r Æ ’ p T ’  p   Ãt …r r E & E " Non-Floating Floating Ay‚h‡v...

  • Page 22: Connecting A Rcvds 05 To The Projector

    Connections T h is d e v i c e co m p lie s w ith P a r t 1 5 o f t he F C C ru le s . O p e ra ti o n i s s ub j ec t to fo ll o w ing tw o c o n d it io n s :   ÃÃ! " ÃW T h is d ev ic e c om p lie s w ith P a r t 1 5 o f t he F CC r ul e s.

  • Page 23: Controlling

    Controlling CONTROLLING IR sensor IR sensor How to Use the RCU? T h i s d e v i c e c o mp l i e s w i t h Pa r t 1 5 o f t h e FC C r u l e s .

  • Page 24: How To Display A Projector Address

    Controlling How to Display a Projector Address? ADDRESS How to Program an Address into the RCU? PROJECTOR ADDRESS ADDRESS Picture Controls with Direct Access. Brightness Control BRIGHTNESS 'brightness' Contrast Control Color Saturation Tint Control Sharpness Control. Phase Control...

  • Page 25: Start Up Of The Adjustment Mode

    Start up of the Adjustment Mode START UP OF THE ADJUSTMENT MODE Adjustment Mode ADJUST ENTER ADJUSTMENT MODE Select a path from below : ENTER EXIT ADJUST RANDOM ACCESS INSTALLATION SERVICE Source 01 Select with then <ENTER> <EXIT> to return. Installation Random Access Service...
  • Page 26 Start up of the Adjustment Mode...

  • Page 27: Random Access Adjustment Mode

    Random Access Adjustment Mode RANDOM ACCESS ADJUSTMENT MODE Starting up the Random Access Adjustment Mode ADJUSTMENT MODE ENTER File Service...

  • Page 28: Load File

    Random Access Adjustment Mode File Service ENTER RANDOM ACCESS ADJUSTMENT MODE ENTER EXIT ADJUST FILE SERVICE Load File FILE SERVICE ENTER LOAD FILE ENTER ENTER CONFIRM LOAD FILE ENTER ENTER EXIT Edit File FILE SERVICE EDIT ENTER ENTER EDIT FILE...
  • Page 29 Random Access Adjustment Mode EDIT FILE xga.s30 ENTER ENTER ENTER How to find the correct values for the displayed item? "Horizontal Total Pixels" "Active Pixels" "Horizontal Start "Horizontal Period" "Vertical Total Lines" "Active Lines" Vertical start Interlaced [On] or [Off] Read AMDS...
  • Page 30 Random Access Adjustment Mode Options Source Number EDIT FILE OPTIONS Clamp Position ENTER Clamp Width Field Polarity Inverted Example for clamp position [trailing] ENTER Vertical Refresh [sync/async] Sync pulse Clamp pulse Clamp width Vertical Sync Polarity CONFIRM EDIT FILE ENTER EXIT ENTER EXIT...

  • Page 31: Rename

    Random Access Adjustment Mode Rename ENTER FILE SERVICE ENTER RENAME FILE RENAME FILE ENTER EXIT Copy FILE SERVICE ENTER ENTER COPY FILE COPY FILE ENTER EXIT...

  • Page 32: Delete

    Random Access Adjustment Mode Delete FILE SERVICE ENTER ENTER DELETE FILE ENTER CONFIRM EXIT DELETE FILE File Options ENTER FILE SERVICE FILE OPTIONS Picture Tuning ENTER RANDOM ACCESS ADJUSTMENT MODE PICTURE TUNING...

  • Page 33: Sync Slow/Fast

    Random Access Adjustment Mode Sync slow/fast PICTURE TUNING SYNC [FAST] ENTER Still Video PICTURE TUNING STILL VIDEO [ON] Color Balance PICTURE TUNING ENTER COLOR BALANCE COLOR BALANCE GAIN RED Gamma PICTURE TUNING GAMMA GAMMA...

  • Page 34: Geometry

    Random Access Adjustment Mode Geometry RANDOM ACCESS ADJUSTMENT MODE ENTER GEOMETRY ENTER ENTER Shift GEOMETRY ENTER Size GEOMETRY ENTER Fixed sides Horizontal size adjustment Vertical size adjustment Example for table mount configuration...

  • Page 35: Side Keystone

    Random Access Adjustment Mode Side Keystone GEOMETRY Blanking GEOMETRY BLANKING Top blanking Right blanking Left blanking Bottom blanking...

  • Page 36: Scale [1:1]

    Random Access Adjustment Mode Adjustment of the blanking on the top of the image BLANKING Adjustment of the blanking on the bottom of the image Correct by pushing the control disc up or down Adjustment of the blanking on the left side Adjustment of the blanking on the right side Correct by pushing the control disc to the right or to the left Scale [1:1]...

  • Page 37: Installation Mode

    Installation Mode INSTALLATION MODE Starting up the Installation Mode ADJUSTMENT MODE Select a path from below : ENTER RANDOM ACCESS ENTER INSTALLATION EXIT SERVICE Source 01 INSTALLATION INPUT SLOTS CONVERGENCE CONFIGURATION OSD COLOR INTERNAL PATTERNS Select with then <ENTER> <EXIT> to return. Input Slots Highlight Input Slots by pushing the control disc up or down and press ENTER.

  • Page 38: Convergence

    Installation Mode Convergence "Convergence" ENTER INSTALLATION INPUT SLOTS CONVERGENCE CONFIGURATION OSD COLOR INTERNAL PATTERNS Select with Select with Select with Select with then <ENTER> then <ENTER> then <ENTER> then <ENTER> CONVERGENCE <EXIT> to return. <EXIT> to return. <EXIT> to return. <EXIT>...
  • Page 39 Installation Mode EXIT Convergence Red on green convergence. Red on green ENTER CONVERGENCE GREEN BLUE ON GREEN RED ON GREEN HATCH Select with then <ENTER> <EXIT> to return. EXIT Test pattern EXIT Test pattern 5975967 BARCODATA 9200 220198...

  • Page 40: Configuration

    Installation Mode Blue on green convergence. Blue on green ENTER CONVERGENCE GREEN BLUE ON GREEN RED ON GREEN HATCH Select with then <ENTER> <EXIT> to return. Hatch ENTER ENTER EXIT Configuration ENTER INSTALLATION INPUT SLOTS For more information, see Projector configuration in chapter 4 : CONVERGENCE CONFIGURATION 'Installation Set Up'.

  • Page 41: Internal Patterns

    Installation Mode Internal Patterns The projector is equipped with different internal patterns which can be used for measurment purposes. INSTALLATION Highlight "Internal Patterns" by pushing the control disc up or down and press ENTER to display the Internal Pattern selection menu. INPUT SLOTS CONVERGENCE The following test pattern are available :...
  • Page 42 Installation Mode 5975967 BARCODATA 9200 220198...

  • Page 43: Service Mode

    Service Mode SERVICE MODE Starting up the Service Mode ADJUSTMENT MODE ENTER SERVICE ENTER ENTER EXIT SERVICE SERVICE BARCO CHANGE PASSWORD CHANGE LANGUAGE DATA 9200 SERVICE RESET LAMP RUN TIME LAMP RUNTIME HISTORY BARCO LOGO...

  • Page 44: Identification

    Service Mode SERVICE PANEL ADJUSTMENT PRESET INPUT BALANCE RED COARSE SERVICE I2C DIAGNOSIS Identification Identification ENTER Identifica- SERVICE tion IDENTIFICATION type software version Proj. Address Installation Baud rate Projector Run Time Projector Serial number...

  • Page 45: Change Password

    Service Mode Change Password How to enable or disable the password function ? How to change the password ? SERVICE ENTER ENTER EXIT ADJUST CHANGE PASSWORD Change Language SERVICE CHANGE LANGUAGE...

  • Page 46: Reset Lamp Runtime

    Service Mode Reset Lamp Runtime SERVICE ENTER RESET LAMP RUNTIME EXIT WARNING ----------------------------------------------------- RISK OF ELECTRICAL SHOCK _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Lamp Run Time History SERVICE ENTER...

  • Page 47: Barco Logo

    Service Mode BARCO logo SERVICE BARCO LOGO ENTER BARCO LOGO Panel Adjustments Changing these settings may seriously affect the performance SERVICE of the projector. PANEL ADJUSTMENTS ENTER WARNING Preset Input Balance SERVICE ENTER PRESET INPUT BALANCE PRESET INPUT BALANCE EXIT...

  • Page 48: I2C Diagnosis

    Service Mode I2C diagnosis. SERVICE ENTER I2C DIAGNOSIS I2C DIAGNOSIS...

  • Page 49: Standard Source Set Up Files

    Standard Source Set Up Files STANDARD SOURCE SET UP FILES Standard source set up files. Name : FVERT Hz : FHOR kHz : FPIX MHz : PTOT : PACT : LTOT : LACT :...

  • Page 50: Appendix A : Standard Source Set Up Files

    Standard Source Set Up Files...

  • Page 51: Appendix B : Lenses

    Lenses LENSES Focusing the lens Lens Cleaning Procedure Cleaning procedure for HD(1.5-3:1) lens and HD(3-5.3:1) lens. FIRST lightly DO NOT DO NOT DO NOT use an aerosol. moisten the cloth or tissue Cleaning procedure for the other HD lens...
  • Page 52 Lenses Lenses Lens formulas to calculate the projector distance.
  • Page 53 Source Numbers 90 - 99 SOURCE NUMBERS 90 - 99 Source numbers 90 - 99...
  • Page 54 Source Numbers 90 - 99...
  • Page 55 5&8 5&8 DI Q V UÃTP V S 8 @T DI Q V UÃTP V S 8@T 352-(&725 352-(&725 DIQVUÃTP V S8@T DIQVUÃTP V S8@T 5&9'6 5&9'6...

Table of Contents